You got the warning. Do not complain if you use ap-config with such firmware and it damages your AP! This will ‘unlock’ your device for downgrading to previous AP firmware version. The name of secondary firmware always uses ‘0’ in the third number field such as “0. They may appear to partially work with ap-utils, but you can cause harm to your AP if you use ap-config with such firmware.

Uploader: Tojazragore
Date Added: 14 February 2007
File Size: 32.34 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 75435
Price: Free* [*Free Regsitration Required]

They may appear to partially work with ap-utils, but you can cause harm to your AP if you use ap-config with such firmware.

Askey RTW020

AP boards from several vendors may contain hardware design bugs, that will totally prevent it from successfull upgrade. You need to wait few seconds prior seeing first AP response. You should choose what is of greater risk for you. Do not at76c51 if you use ap-config with such firmware and it damages your AP!

Note that setting Conf. Its use is discouraged in such environment. All firmware files with revision “1.

  ATI SAPPHIRE X1950 PRO AGP DRIVER

HTTP This page has been moved

Due to the unreliable nature of wireless media and UDP protocol used for upgrade, anything could happen – although there is CRC-like check in the firmware, that prevents flashing of firmware file that has possibly been altered during transmission, upgrade process interruption might cause damage but even this is not very likely.

The values “x”, “y”, and “ab” indicate the firmware revision. Many hardware vendors produce their own more or less modified firmware derivatives, but usually they keep up with the naming scheme introduced by ATMEL: This will ‘unlock’ your device for downgrading to previous AP firmware version.

This is also especially useful if you need to do 2-step upgrade using ‘backup’ and ‘primary’ firmware – see above.

Again, the numbers change according to the firmware revision.

Tellus A14 – WikiDevi

However, so far it has only been tested on the following hardware: The name of secondary firmware always uses ‘0’ in the third number field such as “0. To set up IP in the AP using this method, do the following: So if you run such firmware, please upgrade.

  MSI CR400 WIRELESS LAN DRIVER

You got the warning. Consult manpage for ‘arp’ utility, if your ‘arp’ utility uses different syntax. You may also experience ‘catch up’ very short network break, so utility will resume uploading firmware to your AP.

AP firmware of version 0. Typically, you need to issue as root something like: The ahmel community must match with any of three three communities currently defined in the AP configuration – firmware upgrade will be allowed only upon the match.

It may prevent you from problems arising later. In the case the message for error code returned is not defined in RFCjust the error code alone will be displayed.